MySwingSetStore.com - Hardware

Swing Hangers

Swing hangers are the hinged components that bolt to a beam that allow the swing to move back and forth.

Qty	Image	Description	Price
		Swing Hanger, 4 inch - Nylon Bushing Nylon bushing swing hanger for residential use. This swing hanger has a machine threaded 3/8 inch x 4 inch bolt. The hanger comes with a washer and a nylon lock nut. This hanger can be used in wooden or pipe swing sets. Excess thread can be cut off. A 3/8 inch cap nut fastened in place after the nylon lock nut is recommened. (not included) Galvanized to retard rust. Grade: Residential	$7.99
		Swing Hanger, 6 inch - Nylon Bushing Nylon bushing swing hanger for residential use. This swing hanger has a machine threaded 3/8 inch x 6 inch bolt. The hanger comes with a washer and a nylon lock nut. This hanger can be used in wooden or pipe swing sets. Excess thread can be cut off. A 3/8 inch cap nut fastened in place after the nylon lock nut is recommened. (not included) Galvanized to retard rust. Grade: Residential	$9.99
		Swing Hanger, Wood Beam - Ductile Iron Made of strong ductile iron and galvanized to prevent rust, these swing hangers feature a "oil-lite" bronze bearing and axle bolt. Due to the wide number of beam sizes this hanger can be used with, fastening hardware is not provided with this swing hanger. National Test Lab Results: 5,000 lbs. Grade: Commercial	$21.99
		Swing Hanger, Wood Beam - Ductile Iron with Hardware Kit Same swing hanger as above, but with the necessary hardware for installing on a 4x6 beam as found in the Play-Well California Redwood Series. Two of this item would typically be purchased when adding a glider to an exisiting swingset.	$26.99
		Swing Hanger, 2 3/8 Inch Pipe - Steel Pipe hanger suitable for 2 3/8 inch outer diameter steel pipe. This stamped galvanized steel pipe swing hanger feature an “oil-lite” bronze bearing and axle bolts with lock tight nuts. The stamped steel has more ability to bend, so the hanger will be less likely to snap if torqued too tightly. National Test Lab Results: 5,000 lbs. Grade: Commercial	$26.99
		Swing Hanger, 3 1/2 Inch Pipe - Steel Pipe hanger suitable for 3 1/2 inch outer diameter steel pipe. This stamped galvanized steel pipe swing hanger feature an “oil-lite” bronze bearing and axle bolts with lock tight nuts. The stamped steel has more ability to bend, so the hanger will be less likely to snap if torqued too tightly. National Test Lab Results: 5,000 lbs. Grade: Commercial	$38.79
		Swing Hanger, 4 1/2 Inch Pipe - Steel Pipe hanger suitable for 4 1/2 inch outer diameter steel pipe. This stamped galvanized steel pipe swing hanger feature an “oil-lite” bronze bearing and axle bolts with lock tight nuts. The stamped steel has more ability to bend, so the hanger will be less likely to snap if torqued too tightly. National Test Lab Results: 5,000 lbs. Grade: Commercial	$44.49